MySun foil GF 80W / m2 (1000mm)

(0 customer reviews)

40.63 34.53

  • underfloor heating of floating floors
  • easy installation without major construction work
  • low investment costs and no maintenance
  • low power consumption
  • Ideal for adaptations as the heating foil is extremely thin (approx. 0.2 mm)
  • it is laid just below the surface, so the heating time is short
  • long service life and a 20-year warranty
  • favorable living conditions
  • they provide an almost ideal temperature profile
  • saving on heating costs
  • without raising dust in the room
  • the system is only suitable for floating floors
  • besides the heating mat you need a dedicated one thermostat
  • appropriate thermal insulation Str6  must be placed under the heating foil
  • we recommend you to view before ordering instructions for sizing and installing heating foils. Alternatively, you can watch the video below in the description.
  • When ordering, first select the length of the foil cut, then select the number of pieces of foil of the selected length. Repeat the process for all required foil lengths.
  • if necessary, combine with foil 600mm wide: 1000mm wide heating foil
  • for each piece of foil, the price already includes the additional costs for the contact on the foil, the protective contact tape and the 3m connection cables, which are 4 € + VAT.

In stock

22.15

Potrebujete dodatne informacije pred nakupom?

Ask us

    ** KOOP TRGOVINA d.o.o. pays particular attention to the protection of your personal information. For more detailed rules on the use and processing of your personal information, read Privacy Policy Statement.

    You may also need ...

    THE MOST COMMON WAYS OF INSTALLATION:

     

    1. Direct system – for laminate flooring, certain types of parquet and vinyl

    In this case, the heating foil laminates directly, laminate, parquet, vinyl, which is not glued to the floor but laid floating

    Grelna folija MySun načini polaganja

     

    1. Laminate, vinyl, non-stick flooring
    2. Floor sensor
    3. PE foil, 0.25 mm thick
    4. MySun heating foil
    5. Dedicated STR6 floor insulation
    6. Base

    2. Board system Heat-Pak – for carpet flooring, PVC, warm floors, ..
    This system is used in cases where we want floor heating under the carpet, warm floor or PVC floor covering. Since these final floors are not mechanically strong enough, in these cases it is necessary to use HEAT-PAK panels, which serve as mechanical protection against damage to the heating foil. The floor height is raised by approx. 10 mm with this mounting system. The said boards are laid in two layers, each plate having a glue coating to adhere the boards to each other. The boards should be laid (glued) crosswise – this gives you a solid base on which you can lay PVC flooring, carpet or any other final floor that is not mechanically rigid enough to be placed directly on the MySun heating foil.

    Grelna folija MySun načini polaganja

     

    1. Final coat – carpet, PVC, warm floor etc.
    2. HEAT-PAK panels
    3. Floor sensor
    4. PE-foil, 0.25mm thick
    5. MySun heating foil
    6. Dedicated STR6 floor insulation
    7. Base

    3. Video

    Warranty

    20 years

    Power (W)

    80W/m2 or 78 W/m

    Voltage (V)

    230

    Heating film width (mm)

    970

    Total film width (mm)

    1000

    • (velikost: )

    Reviews

    There are no reviews yet.

    Be the first to review “MySun foil GF 80W / m2 (1000mm)”